Packing and Shipping EasyPak™ VaporShield® Lamp Recycling Boxes

1. Fit Bottom End-Cap to Container

Unpack VaporShield® box. Fit one of the end-caps to the bottom of the container, remove the adhesive strips on the four (4) flaps and press them onto the exterior of the container to create a secure seal.

2. Seal Bottom of Container

With the flaps properly closed, seal all sides and corners of the bottom of the container with 3” wide box tape. DO NOT USE MASKING TAPE. DO NOT SHIP WITH EDGES OR CORNERS EXPOSED.

3. Fill with Lamps Until Full

Place box in a secure position. Fill in the “ACCUMULATION DATE” with a permanent marker in the space provided above. Carefully fill the entire box with intact fluorescent lamps.

Fit top cap securely to close container when not filling with lamps.

CAUTION--DO NOT SEAL TOP CAP UNTIL CONTAINER IS FULL. Do not place broken lamps in container--EasyPak™ customer service can assist with broken or crushed lamps. 

4. Seal Top of Full Container

Fit the second (top) end-cap to the top of the container, remove the adhesive strips on the four (4) flaps and press them onto the exterior of the container to create a secure seal.

With the flaps properly closed, seal all sides and corners of the top of the container with 3” wide box tape. DO NOT USE MASKINg TAPE. DO NOT SHIP WITH EDGES OR CORNERS EXPOSED.

5. Ship Container to Recycling Facility

Fill out generator information below and record the return shipment tracking number found on your return shipping label (required when retrieving recycling certificates).

VaporShield® containers can be picked up with your regular, daily pickups or to schedule a pickup call 888.640.6700 or visit www.LampRecycling.com/Pickup.

6. Recycling Certificate Information

To access your certificate of recycling, please visit www.LampRecycling.com/Certificates. Be ready to provide your shipment tracking number.